Результаты поиска по запросу «RF Semiconductors and Devices»

The LM2794/95 is a fractional CMOS charge-pump that provides four regulated current sources. It accepts an input voltage range from 2.7V to 5.5V and maintains a constant current determined by an external sense resistor. The LM2794/5 delivers up to 80mA of load current to accommodate four White LEDs. The switching frequency is 325kHz. (min.) to keep the conducted noise spectrum away from sensitive frequencies within portable RF devices. Brightness can be controlled by both linear and PWM techniques. A voltage between 0V and 3.0V may be applied to the BRGT pin to linearly vary the LED current. Alternatively, a PWM signal can be applied to the SD pin to vary the perceived brightness of the LED. The SD pin reduces the operating current to 2.3uA (typ.) The LM2794 is shut down when the SD pin is low, and the LM2795 is shut down when the SD pin is high. The LM2794/95 is available in a micro SMD-14 CSP package.

RF TRANSISTOR, NPN, REEL 1K; Transistor Polarity: NPN; Collector Emitter Voltage V(br)ceo: 9.5V; Transition Frequency ft: 900MHz; Power Dissipation Pd: 2W; DC Collector Current: 500mA; DC Current Gain hFE: 25hFE; RF Transistor Case: SOT-223; No. of Pins: 3Pins; Operating Temperature Max: 175°C; Product Range: -; Automotive Qualification Standard: -; MSL: -; SVHC: No SVHC (27-Jun-2018); Av Current Ic: 500mA; Continuous Collector Current Ic: 500mA; Continuous Collector Current Ic Max: 500mA; Current Ic Continuous a Max: 500mA; Current Ic hFE: 300mA; Efficiency: 60%; External Depth: 7.5mm; External Length / Height: 1.7mm; External Width: 6.7mm; Gain Bandwidth ft Typ: 900MHz; Hfe Min: 25; Load Power: 1.2W; No. of Transistors: 1; Power Dissipation Ptot Max: 2W; Power Gain Gp Min: 6dB; Reel Quantity: 1000; SMD Marking: BLT81; Supply Voltage: 7.5V; Tape Width: 12mm; Termination Type: Surface Mount Device; Transistor Case Style: SOT-223; Voltage Vcbo: 20V

The LM2794/95 is a fractional CMOS charge-pump that provides four regulated current sources. It accepts an input voltage range from 2.7V to 5.5V and maintains a constant current determined by an external sense resistor. The LM2794/5 delivers up to 80mA of load current to accommodate four White LEDs. The switching frequency is 325kHz. (min.) to keep the conducted noise spectrum away from sensitive frequencies within portable RF devices. Brightness can be controlled by both linear and PWM techniques. A voltage between 0V and 3.0V may be applied to the BRGT pin to linearly vary the LED current. Alternatively, a PWM signal can be applied to the SD pin to vary the perceived brightness of the LED. The SD pin reduces the operating current to 2.3uA (typ.) The LM2794 is shut down when the SD pin is low, and the LM2795 is shut down when the SD pin is high. The LM2794/95 is available in a micro SMD-14 CSP package.